La communauté de l’UQAC en publications – Septembre 2016


La liste ci-dessous recense les écrits et les collaborations à de la documentation scientifique ou académique de membres de la communauté universitaire de l’UQAC (professeurs, chargés de cours, chercheurs, étudiants, etc.).


Chapitres de livre

Andoh, M. A., Kocaefe, D., Bhattacharyay, D., Kocaefe, Y., Marceau, D., & Morais, B. (2016). Measurement of The Electric Current Distribution in an Anode. Dans Light Metals 2016 (pp. 889-894).

Bureau, J., Kocaefe, D., Bhattacharyay, D., Kocaefe, Y., & Morais, B. (2016). Quantification of Sodium Present in Dry Aggregates and Anodes. Dans Light Metals 2016 (pp. 877-881).

Chamam, Y., Kocaefe, D., Kocaefe, Y., Bhattacharyay, D., & Morais, B. (2016). Effect of Heating Rate During Baking on The Properties of Carbon Anodes Used in Aluminum Industry. Dans Light Metals 2016 (pp. 947-951).

Chehouri, A., Younès, R., Ilinca, A., & Perron, J. (2016). Wind turbine design : multi‐objective optimization. Dans Wind Turbines : Design, Control and Applications (pp. 121-147). Rijeka, Croatia: InTech.

Dion, L., Lagacé, C. L., Kiss, L. I., & Poncsák, S. (2016). Using Artificial Neural Network to Predict Low Voltage Anode Effect PFCs at the Duct End of an Electrolysis Cell. Dans Light Metals 2016 (pp. 545-550).

Dufour, S. O., Marceau, D., Kocaefe, D., Lagacé, C. L., Gagnon, M., Laflamme, F., & Ladouceur, G. (2016). In Situ Investigation of The Behavior of Anode Assemblies. Dans Light Metals 2016 (pp. 959-964).

Huang, X. A., Kocaefe, D., Bhattacharyay, D., Kocaefe, Y., & Morais, B. (2016). Characterization of Carbon Anode Materials by Image Analysis. Dans Light Metals 2016 (pp. 855-864).

Lu, Y., Kocaefe, D., Kocaefe, Y., Bhattacharyay, D., Huang, X. A., & Morais, B. (2016). Study of the Wetting of Coke by Different Pitches. Dans Light Metals 2016 (pp. 871-876).

Poncsák, S., Kiss, L., Raymond, V. D., Kaszás, C., Guérard, S., & Bilodeau, J. F. (2016). Impact of the Heat Flux on Solidification of Cryolite Based Bath. Dans Light Metals 2016 (pp. 359-364).


Actes de conference

Ayena, J. C., Chapwouo, T. L. D., Otis, M. J. D., Menelas, B. A. J.(2015). An Efficient Home-Based Risk of Falling Assessment Test Based on Smartphone and Instrumented Insole. 2015 IEEE International Symposium on Medical Measurements and Applications (Memea) Proceedings, 416-421.

Benkalai, I., Rebaine, D., & Baptiste, P. (2016). Assigning operators in a flow shop environment. Communication présentée au ILS 2016 – 6th International Conference on Information Systems, Logistics and Supply Chain.

Bilodeau, J. S., Fortin-Simard, D., Gaboury, S., Bouchard, B., Bouzouane, A., & Ieee. (2015, 6-8 July). A practical comparison between filtering algorithms for enhanced RFID localization in smart environments. Communication présentée au 2015 6th International Conference on Information, Intelligence, Systems and Applications (LISA).

Deschênes, G. (2016, 24-28 August). The Roman Catholic Church’s position regarding sport and leisure practices before and subsequent to the ‘Quiet Revolution’ : the case of Québec in Canada. Communication présentée au Inaugural Global Congress on Sports and Christianity, York St John University, UK.

Fraser, K. A., St-Georges, L., Kiss, L. I., & Chiricota, Y. (2015). Hybrid Thermo-Mechanical Contact Algorithm for 3D SPH-FEM Multi-Physics Simulations. Communication présentée au Particle-Based Methods Iv-Fundamentals and Applications, Barcelona, Spain.

Kairous, D., Wamkeue, R., Ouhrouche, M., & Ieee. (2015, 17-19 August). Second Order Sliding-Mode for Direct Power Control of DFIG under Distorted Grid. Communication présentée au 2015 Ieee International Conference on Smart Energy Grid Engineering (SEGE 2015).

Maitre, J., Gaboury, S., Bouchard, B., Bouzouane, A., & Ieee. (2015, July 6-8). An Effective Identification of the Induction Machine Parameters using a Classic Genetic Algorithm, NSGA II and theta-NSGA III. Communication présentée au 2015 6th International Conference on Information, Intelligence, Systems and Applications (Iisa), Corfu, Greece.

McHeick, H. (2016). Ubiquitous Computing and Context-aware Applications: Survey and Contributions. Communication présentée au Proceedings – 2016 IEEE 1st International Conference on Connected Health: Applications, Systems and Engineering Technologies, CHASE 2016.

McHeick, H., Nasser, H., Dbouk, M., & Nasser, A. (2016). Stroke Prediction Context-Aware Health Care System. Communication présentée au Proceedings – 2016 IEEE 1st International Conference on Connected Health: Applications, Systems and Engineering Technologies, CHASE 2016.


Articles de revue

Abdelaziz, J., Adda, M., & McHeick, H. (2016). Toward Service Aggregation for Edge Computing. Procedia Computer Science, 94, 424-428.

Amrani, S., Kocaefe, D., Kocaefe, Y., Bhattacharyay, D., Bouazara, M., & Morais, B. (2016). Characterization of Cracking Mechanisms of Carbon Anodes Used in Aluminum Industry by Optical Microscopy and Tomography. Journal of Materials Engineering and Performance, 1-9.

Arianpour, F., Farhadi, S., & Farzaneh, M. (2016). Effect of heterogeneity on hydro/ice-phobic properties of alkylsilane/fluoro-alkylsilane-based coatings on Al substrates. Journal of Coatings Technology Research, 1-9.

Arshad, Nekahi, A., McMeekin, S. G., & Farzaneh, M. (2016). Numerical Computation of Electric Field and Potential Along Silicone Rubber Insulators Under Contaminated and Dry Band Conditions. 3D Research, 7(25).

Baptiste, P., Bürgy, R., Hertz, A., & Rebaine, D. (2016). Online heuristics for unloading boxes off a gravity conveyor. International Journal of Production Research, 1-12.

Bélisle, A. C., Leduc, A., Gauthier, S., Desrochers, M., Mansuy, N., Morin, H., & Bergeron, Y. (2016). Detecting local drivers of fire cycle heterogeneity in boreal forests: A scale issue. Forests, 7(7), 139.

Bolouri, A., Liu, K., & Chen, X. G. (2016). Effects of Iron-Rich Intermetallics and Grain Structure on Semisolid Tensile Properties of Al-Cu 206 Cast Alloys near Solidus Temperature. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1-15.

Boucher, J., Hébert, C., Ibarzabal, J., Bauce, É., R. Leather, S., & Jonsell, M. (2016). High conservation value forests for burn-associated saproxylic beetles: an approach for developing sustainable post-fire salvage logging in boreal forest. Insect Conservation and Diversity, 9(5), 402-415.

Boukhechba, M., Bouzouane, A., Gaboury, S., Gouin-Vallerand, C., Giroux, S., & Bouchard, B. (2016). Hybrid Battery-friendly Mobile Solution for Extracting Users’ Visited Places. Procedia Computer Science, 94, 25-32.

Cao, X., Sadayappan, K., & Chen, X. G. (2016). Advances in Materials Manufacturing II. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 1.

Cody, N., Coulombe, S., Giroux, P., Gauthier, D., & Gaudreault, S. (2016). Pratiques, objets et finalités de collaboration en lien avec l’intégration des tablettes numériques dans une école secondaire. Canadian Journal of Learning and Technologies / La revue canadienne de l’apprentissage et de la technologie, 42(3).

Deschênes, G. (2016). Compte rendu (style essai) de l’ouvrage de George Karlis (2016). Leisure and recreation in Canadian society : an introduction (3rd ed.) Leisure / Loisir, 40(2), 249-252.

Deschênes G., Heintzman P. & Reimer J. (2015). Integrating religious and spiritual practices with therapeutic leisure within the recovery process of persons with mental disorders. Counseling et Spiritualité / Counselling and spirituality, 34, (2), 29-60.

Dion, L., Kiss, L. I., Poncsák, S., & Lagacé, C. L. (2016). Prediction of Low-Voltage Tetrafluoromethane Emissions Based on the Operating Conditions of an Aluminium Electrolysis Cell. JOM, 68(9), 2472-2482.

Duran, C. J., Seydoux-Guillaume, A. M., Bingen, B., Gouy, S., de Parseval, P., Ingrin, J., & Guillaume, D. (2016). Fluid-mediated alteration of (Y,REE,U,Th)–(Nb,Ta,Ti) oxide minerals in granitic pegmatite from the Evje-Iveland district, southern Norway. Mineralogy and Petrology, 110(5), 581-599.

Gauthier, M. J. (2016). La température à Saint-Fulgence, Québec, Canada : étude exploratoire sur les microclimats favorables à l’horticulture : rapport de recherche. Laboratoire d’expertise et de recherche en géographique appliquée (LERGA)

Giroux, P., Cody, N., Coulombe, S., Coté, L., & Gaudreault, S. (2016). Appréciation et perception du projet d’intégration des tablettes numériques au secondaire par les finissants de 2014-2015 : rapport de recherche. Université du Québec à Chicoutimi

Henrique-Pinto, R., Barnes, S. J., Savard, D. D., & Mehdi, S. (2016). Quantification of Metals and Semimetals in Carbon-Rich Rocks: A New Sequential Protocol Including Extraction from Humic Substances. Geostandards and Geoanalytical Research.

Huang, X., Kocaefe, D., Kocaefe, Y., & Bhattacharyay, D. (2016). Interaction of bio-coke with different coal tar pitches. Fuel, 179, 179-192.

Huet, M., Chesnaux, R., Boucher, M., & Poirier, C. (2016). Comparing various approaches for assessing groundwater recharge at a regional scale in the Canadian Shield. Hydrological Sciences Journal, 61(12), 2267-2283.

Javidani, M., Larouche, D., & Grant Chen, X. (2016). Dissolution of Cu/Mg Bearing Intermetallics in Al-Si Foundry Alloys. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47(10), 4818-4830.

Junaedi, H., Ibrahim, M. F., Ammar, H. R., Samuel, A. M., Soliman, M. S., Almajid, A. A., & Samuel, F. H. (2016). Effect of testing temperature on the strength and fracture behavior of Al-B4C composites. Journal of Composite Materials, 50(20), 2871-2880.

Khreiss, M., Zaarour, I., & McHeick, H. (2016). SMILE: Smart monitoring intelligent learning engine: An ontology-based context-aware system for supporting patients subjected to severe emergencies. International Journal of Healthcare Technology and Management, 15(3), 194-209.

Lavoie, C. (2016). L’effet de la trousse Je joue avec les sons sur la conscience phonologique: Le cas d’élèves innus de maternelle. Canadian Modern Language Review, 72(3), 339-359.

Liu, Y., Farzaneh, M., & Du, B. X. (2016). Nonlinear characteristics of leakage current for flashover monitoring of ice-covered suspension insulators. IEEE Transactions on Dielectrics and Electrical Insulation, 23(3), 1242-1250.

Otis, M. J. D., Ayena, J. C., Tremblay, L. E., Fortin, P. E., & Ménélas, B.-A. J. (2016). Use of an Enactive Insole for Reducing the Risk of Falling on Different Types of Soil Using Vibrotactile Cueing for the Elderly. PloS one, 11(9), e0162107.

Piña, R., Gervilla, F., Barnes, S. J., Oberthür, T., & Lunar, R. (2016). Platinum-group element concentrations in pyrite from the Main Sulfide Zone of the Great Dyke of Zimbabwe. Mineralium Deposita, 51(7), 853-872.

Qin, J., Zhang, Z., & Chen, X. G. (2016). Mechanical Properties and Strengthening Mechanisms of Al-15 Pct B4C Composites with Sc and Zr at Elevated Temperatures. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47(9), 4694-4708.

Roberge, P., Hudon, C., Pavilanis, A., Beaulieu, M. C., Benoit, A., Brouillet, H., Vanasse, A. (2016). A qualitative study of perceived needs and factors associated with the quality of care for common mental disorders in patients with chronic diseases: The perspective of primary care clinicians and patients. BMC Family Practice, 17(1).

Roux, J., Lussier-Desrochers, D., Lachapelle, Y., Bouchard, B., & Bouchard, J. (2016). Analysis of interaction patterns in the use of high-tech prompting technologies by people with intellectual disabilities. Advances in Intelligent Systems and Computing, 500, 509-518.

Samuel, A. M., Elgallad, E. M., Doty, H. W., Valtierra, S., & Samuel, F. H. (2016). Effect of metallurgical parameters on the microstructure, hardness impact properties, and fractography of Al-(6.5-11.5) wt% Si based alloys. Materials and Design, 107, 426-439.

Simard, F., Gauthier, C., Legault, J., Lavoie, S., Mshvildadze, V., & Pichette, A. (2016). Structure elucidation of anti-methicillin resistant Staphylococcus aureus (MRSA) flavonoids from balsam poplar buds. Bioorganic and Medicinal Chemistry, 24(18), 4188-4198.

Van der Maaten, E., Van der Maaten-Theunissen, M., Smiljanić, M., Rossi, S., Simard, S., Wilmking, M., Bouriaud, O. (2016). DendrometeR: Analyzing the pulse of trees in R. Dendrochronologia, 40, 12-16.

Xie, Y., Kocaefe, D., Chen, C., & Kocaefe, Y. (2016). Review of Research on Template Methods in Preparation of Nanomaterials. Journal of Nanomaterials, 2016.

Xie, Y., Kocaefe, D., Kocaefe, Y., Cheng, J., & Liu, W. (2016). The Effect of Novel Synthetic Methods and Parameters Control on Morphology of Nano-alumina Particles. Nanoscale Research Letters, 11(1).

Xu, N., Sarkar, D. K., Chen, X. G., & Tong, W. P. (2016). Corrosion performance of superhydrophobic nickel stearate/nickel hydroxide thin films on aluminum alloy by a simple one-step electrodeposition process. Surface and Coatings Technology, 302, 173-184.

Yin, F., Farzaneh, M., & Jiang, X. (2016). Influence of AC electric field on conductor icing. IEEE Transactions on Dielectrics and Electrical Insulation, 23(4), 2134-2144.

Yin, F., Farzaneh, M., & Jiang, X. (2016). Laboratory investigation of AC corona loss and corona onset voltage on a conductor under icing conditions. IEEE Transactions on Dielectrics and Electrical Insulation, 23(3), 1862-1871.


*Pour certains titres, vous devez choisir parmi les bases de données qui offrent le titre en question pour y avoir accès.

**En dehors des murs de l’UQAC, votre numéro d’usager et mot de passe de la bibliothèque sont nécessaires pour accéder à ces ressources.


Share on Facebook