Archives pour la catégorie Publications UQAC

La communauté de l’UQAC en publication (janvier 2011)

La bibliothèque Paul-Émile-Boulet est heureuse de présenter les parutions scientifiques du mois de janvier publiées par les membres de la communauté universitaire de l’UQAC. Ces publications sont recensées dans les banques de données Web of Science et Scopus.

Bahoura, M. and H. Ezzaidi (2010). Real-time implementation of discrete wavelet transform on FPGA.

Bédard, L. P. and K. L. Linge (2010). « GGR Biennial Review: Atomic Absorption, Inductively Coupled Plasma-Atomic Emission Spectrometry, Neutron Activation Analysis and X-Ray Fluorescence Spectrometry Review for 2008-2009. » Geostandards and Geoanalytical Research 34(4): 343-352.

Bournane, M. (2010). « Aging effect on the mechanical proprieties of Al7SiMg alloy. » Effet de vieillissement sur les proprietes mecaniques de l’alliage Al7SiMg 55: 118-122.

Debray, F. G., C. Morin, et al. (2011). « LRPPRC mutations cause a phenotypically distinct form of Leigh syndrome with cytochrome c oxidase deficiency. » Journal of Medical Genetics.

Dong, Y., M. Farzaneh, et al. (2010). « Critical condition of arc propagation on ice-covered insulators. » Dianwang Jishu/Power System Technology 34(10): 206-210.

Hallé, S. and T. Bultan (2010). Realizability analysis for message-based interactions using shared-state projections.

Hergt, J. M., R. Arevalo Jr, et al. (2010). « GGR Critical Review of Analytical Developments in 2008-2009: An Introduction. » Geostandards and Geoanalytical Research 34(4): 325-326.

Higgins, M. D. (2011). « Textural coarsening in igneous rocks. » International Geology Review 53(3-4): 354-376.

Ibrahim, M. F., E. Samuel, et al. (2011). « Metallurgical parameters controlling the microstructure and hardness of Al-Si-Cu-Mg base alloys. » Materials and Design 32(4): 2130-2142.

Mamelona, J., E. Pelletier, et al. (2011). « Antioxidants in digestive tracts and gonads of green urchin (Strongylocentrotus droebachiensis). » Journal of Food Composition and Analysis.

Roy-Gagnon, M. H., C. Moreau, et al. (2011). « Genomic and genealogical investigation of the French Canadian founder population structure. » Human Genetics: 1-11.

Saleema, N., D. K. Sarkar, et al. (2010). « Superhydrophobic aluminum alloy surfaces by a novel one-step process. » ACS Applied Materials and Interfaces 2(9): 2500-2502.

Sioud, A., M. Gravel, et al. (2010). Constraint based scheduling in a genetic algorithm for the single machine scheduling problem with sequence-dependent setup times.

Share on Facebook

La communauté de l’UQAC en publication (novembre 2010)

La bibliothèque Paul-Émile-Boulet est heureuse de présenter les parutions scientifiques du mois de septembre publiées par les membres de la communauté universitaire de l’UQAC. Ces publications sont recensées dans les banques de données Web of Science et Scopus.

Adda, M. and H. McHeick (2010). Facet-based access control model for view-oriented programming. 2010 ACS/IEEE International Conference on Computer Systems and Applications, AICCSA 2010.

Aryanpour, G. and M. Farzaneh (2010). « Constitutive modeling for plasticity of metal powders during compaction. » Journal of Porous Media 13(9): 807-823.

Beroual, A., J. H. Rakotonandrasana, et al. (2010). « Predictive dynamic model of the negative lightning discharge based on similarity with long laboratory sparks – Part 2: Validation. » IEEE Transactions on Dielectrics and Electrical Insulation 17(5): 1562-1568.

Beroual, A., J. H. Rakotonandrasana, et al. (2010). « Predictive dynamic model of the negative lightning discharge based on similarity with long laboratory sparks Part 1: Physical process and modeling. » IEEE Transactions on Dielectrics and Electrical Insulation 17(5): 1551-1561.

Fofana, I., H. Hemmatjou, et al. (2010). Polarization and depolarization current measurements of oil impregnated paper insulation system under thermal runaway. Proceedings of the 2010 IEEE International Conference on Solid Dielectrics, ICSD 2010.

Fortin, G. and J. Perron (2009). Spinning Rotor Blade tests in icing wind tunnel. 1st AIAA Atmospheric and Space Environments Conference.

Fortin, G., J. Perron, et al. (2009). CIRAAMIL ice accretion code improvement. 1st AIAA Atmospheric and Space Environments Conference.

Jafari, R., R. Menini, et al. (2010). « Superhydrophobic and icephobic surfaces prepared by RF-sputtered polytetrafluoroethylene coatings. » Applied Surface Science 257(5): 1540-1543.

Kamguo Kamga, H., D. Larouche, et al. (2010). « Solidification of aluminum-copper B206 alloys with iron and silicon additions. » Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 41(11): 2844-2855.

Lai, J., Z. Zhang, et al. (2009). Effect of Sc and Zr addition on strengthening of Al-B4C composites at elevated temperatures. Materials Science and Technology Conference and Exhibition 2009, MS and T’09.

Legault, J., K. Girard-Lalancette, et al. (2010). « Antioxidant activity, inhibition of nitric oxide overproduction, and in vitro antiproliferative effect of maple sap and syrup from Acer saccharum. » Journal of medicinal food 13(2): 460-468.

Maier, W. D. and S. J. Barnes (2010). « The petrogenesis of platinum-group element reefs in the upper main zone of the northern lobe of the Bushveld Complex on the farm Moorddrift, South Africa. » Economic Geology 105(4): 841-854.

Matbou Riahi, M., D. Marceau, et al. (2010). « The experimental/numerical study to predict mechanical behaviour at the ice/aluminium interface. » Cold Regions Science and Technology.

Shi, C. J., Z. Zhang, et al. (2009). Microstructure and fluidity evolution of recycled materials of Al-B 4C metal matrix composites. Materials Science and Technology Conference and Exhibition 2009, MS and T’09.

St-Georges, L., L. I. Kiss, et al. (2010). Determination of contact condition at elevated temperature. ASME International Mechanical Engineering Congress and Exposition, Proceedings.

Younsi, R., S. Poncsak, et al. (2010). « Experimental and numerical investigation of heat and mass transfer during high-temperature thermal treatment of wood. » Drying Technology 28(10): 1148-1156.

Share on Facebook

La communauté de l’UQAC en publication !

La bibliothèque Paul-Émile-Boulet est heureuse de présenter les parutions scientifiques du mois de septembre publiées par les membres de la communauté universitaire de l’UQAC. Ces publications sont recensées dans les banques de données Web of Science et Scopus.

Balima, O., et al. « New Developments in Frequency Domain Optical Tomography. Part I: Forward Model and Gradient Computation. » Journal of Quantitative Spectroscopy and Radiative Transfer (2010).

Ballantyne, K. N., et al. « Mutability of Y-Chromosomal Microsatellites: Rates, Characteristics, Molecular Bases, and Rorensic Implications. » American Journal of Human Genetics 87.3 (2010): 341-53.

Belkhir, S., et al. « Electric Field Assessment for Application to Live Working. » International Journal of Power and Energy Systems 30.3 (2010): 192-98.

Boulanger, J., O. Balima, and A. Charette. « Refractive Index Imaging from Radiative Transfer Equation-Based Reconstruction Algorithm: Fundamentals. » Journal of Quantitative Spectroscopy and Radiative Transfer (2010).

Errouissi, R., and M. Ouhrouche. « Nonlinear Predictive Controller for a Permanent Magnet Synchronous Motor Drive. » Mathematics and Computers in Simulation (2010).

Gagnon, C., et al. « Health Supervision and Anticipatory Guidance in Adult Myotonic Dystrophy Type 1. » Neuromuscular Disorders (2010).

Huang, Y., D. K. Sarkar, and X. G. Chen. « A One-Step Process to Engineer Superhydrophobic Copper Surfaces. » Materials Letters 64.24 (2010): 2722-24.

Jafari, R., R. Menini, and M. Farzaneh. « Superhydrophobic and Icephobic Surfaces Prepared by Rf-Sputtered Polytetrafluoroethylene Coatings. » Applied Surface Science (2010).

Kamguo Kamga, H., et al. « Hot Tearing of Aluminum-Copper B206 Alloys with Iron and Silicon Additions. » Materials Science and Engineering A 527.27-28 (2010): 7413-23.

Lai, J., Z. Zhang, and X. G. Chen. « Effect of Sc, Zr, and Ti on the Interfacial Reactions of the B4c/Al System. » Journal of Materials Science (2010): 1-9.

Lemieux, A., et al. « Effect of Si, Cu and Fe on Mechanical Properties of Cast Semi-Solid 206 Alloys. » Transactions of Nonferrous Metals Society of China (English Edition) 20.9 (2010): 1555-60.

Lupi, C., et al. « Xylem Phenology and Wood Production: Resolving the Chicken-or-Egg Dilemma. » Plant, Cell and Environment 33.10 (2010): 1721-30.

Olson, S., et al. « Tracking Tuberculosis in the Past: The Use of Genealogical Evidence. » Journal of Historical Geography 36.3 (2010): 327-41.

Tebib, M., et al. « Semi-Solid Processing of Hypereutectic A390 Alloys Using Novel Rheoforming Process. » Transactions of Nonferrous Metals Society of China (English Edition) 20.9 (2010): 1743-48.

Thongam, J. S., et al. « Sensorless Control of Pmsg in Variable Speed Wind Energy Conversion Systems. » 2010 International Power Electronics Conference – ECCE Asia -, IPEC 2010, 2010. 2254-59.

Toledo-Rodriguez, M., et al. « Maternal Smoking During Pregnancy Is Associated with Epigenetic Modifications of the Brain-Derived Neurotrophic Factor-6 Exon in Adolescent Offspring. » American Journal of Medical Genetics, Part B: Neuropsychiatric Genetics 153.7 (2010): 1350-54.

Tremblay, M., and H. Vézina. « Genealogical Analysis of Maternal and Paternal Lineages in the Quebec Population. » Human Biology 82.2 (2010): 179-98.

Share on Facebook

La communauté de l’UQAC en publication!

La Bibliothèque Paul-Émile-Boulet est heureuse de présenter les parutions scientifiques du mois de juillet publiées par les membres de la communauté universitaire de l’UQAC. Ces publications sont recensées dans la banque de données Scopus.

Articles parus en juillet 2010 :

Bouchard, K., Ajroud, A., Bouchard, B., & Bouzouane, A. SIMACT: A 3D open source smart home simulator for activity recognition Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (Vol. 6059 LNCS, pp. 524-533).

Chen, P., Haboudane, D., Tremblay, N., Wang, J., Vigneault, P., & Li, B. New spectral indicator assessing the efficiency of crop nitrogen treatment in corn and wheat. Remote Sensing of Environment, 114(9), 1987-1997.

Chiricota, Y., & Gilbert, J. M. (2007). IMTool: An open framework for interactive music composition. Communication présentée Proceedings of the 2007 Conference on Future Play, Future Play ’07.

Dare, S. A. S., Barnes, S. J., & Prichard, H. M. The distribution of platinum group elements (PGE) and other chalcophile elements among sulfides from the Creighton Ni-Cu-PGE sulfide deposit, Sudbury, Canada, and the origin of palladium in pentlandite. Mineralium Deposita, 1-29.

Dion, J., Kennedy, A., Cloutier, P., & Gray, C. Evaluating crisis intervention services for youth within an emergency department: A view from within. Child Care in Practice, 16(3), 241-256.

Elgallad, E. M., Samuel, F. H., Samuel, A. M., & Doty, H. W. Machinability aspects of new Al-Cu alloys intended for automotive castings. Journal of Materials Processing Technology.

Gravel, M., Gagné, C., Noël, S., & Zinflou, A. (2008). Combining metaheuristics and ILP for solving the car sequencing problem. Revue d’Intelligence Artificielle, 22(2), 209-235.

Jonville, M. C., Kodja, H., Strasberg, D., Pichette, A., Ollivier, E., Frédérich, M., et al. Antiplasmodial, anti-inflammatory and cytotoxic activities of various plant extracts from the Mascarene Archipelago. Journal of Ethnopharmacology.

McCubbin, M., Dallaire, B., Lagrange, V., Wallot, H., Bergeron-Leclerc, C., Cormier, C., et al. Reconstruction et rééquilibrage du lien social: Une étude exploratoire sur les rôles de l’inclusion sociale, de l’appropriation du pouvoir d’agir et de l’espoir dans le rétablissement. Canadian Journal of Community Mental Health, 29(1), 1-18.

Tarroux, E., DesRochers, A., & Krause, C. Effect of natural root grafting on growth response of jack pine (Pinus banksiana) after commercial thinning. Forest Ecology and Management, 260(4), 526-535.

Vékony, K., & Kiss, L. I. Morphology of Two-Phase Layers with Large Bubbles. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 1-12.

Share on Facebook