2023

1. K. Kweitsu. D.K. Sarkar, X.-G. Chen, “A Short Review on Superplasticity of Aluminum Alloys”, Engineering Proceedings, 43 (2023) 43, doi.org/10.3390/engproc2023043043, 15th International Aluminium Conference, Québec, QC, Canada, 11–13 October 2023
2. M. Tiwari, S. Noormohammed, X.-G. Chen, D.K. Sarkar, “Simultaneous anodization and silanization for adhesive joining of AA 3031 using an epoxy adhesive”, Materialwiss. Werkstofftech. 54 (2023)1092–36, doi.org/10.1002/mawe.202100391, 6th International Conference on Mechanical, Manufacturing and Plant Engineering
3. M. Tiwari, S. Noormohammed, D.K. Sarkar, X.-G. Chen, “Polymer–Aluminum Lightweight Multi-Material Joints Bonded with Mixed Adhesive”, Engineering Proceedings, 43 (2023) 29, doi.org/10.3390/engproc2023043029, 15th International Aluminium Conference, Québec, QC, Canada, 11–13 October 2023
4. Khoshghadam-Pireyousefan, M. Javidani, A. Maltais, J. Levesque, X.-G. Chen, “Effect of Annealing Temperature on the Microstructure, Mechanical Properties, and Electrical Conductivity of 4xxx Series Al-Based Alloys”, Engineering Proceedings, 43 (2023) 14, doi.org/10.3390/engproc2023043014, 15th International Aluminium Conference, Québec, QC, Canada, 11–13 October 2023
5. Qassem, D. Larouche, M. Javidani, X.-G. Chen: “Tensile Properties of the Subsurface and Center Regions of AA6111 Direct-Chill-Cast Ingot in Semisolid State and Their Hot Tearing Susceptibility”, Engineering Proceedings, 43 (2023) 9, doi.org/10.3390/engproc2023043009, 15th International Aluminium Conference, Québec, QC, Canada, 11–13 October 2023

6. Yavari, A. Algendy, M. Javidani, L. Pan, X.-G. Chen: “Effects of Ni Content and Alloying Elements on Electrical Conductivity, Mechanical Properties, and Hot Tearing Susceptibility of Al-Ni-Based Alloys”, Engineering Proceedings, 43 (2023) 3, doi.org/10.3390/engproc2023043003, 15th International Aluminium Conference, Québec, QC, Canada, 11–13 October 2023

7. Algendy, K. Liu, P. Rometsch, N. Parson, X.-G. Chen: “Effect of Sc and Zr Additions on Dispersoid Microstructure and Mechanical Properties of Hot-Rolled AA5083”, In: Broek, S. (eds) Light Metals 2023, p. 1229–1237, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org/10.1007/978-3-031-22532-1_165
8. Rometsch, J. Fourmann, E. Elgallad, X.-G. Chen: “Use of Sc to Improve the Properties of AA5083 Cast and Rolled Products”, In: Broek, S. (eds) Light Metals 2023, p. 1213–1222, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org/10.1007/978-3-031-22532-1_163
9. Shao, E. Elgallad, A. Maltais, X.-G. Chen: “Developing Al-Zr-Sc Alloys as High-Temperature-Resistant Conductors for Electric Overhead Line Applications”, In: Broek, S. (eds) Light Metals 2023, p.1266-1272, TMS 2023. The Minerals, Metals & Materials Series. Springer, doi.org/10.1007/978-3-031-22532-1_170

 

2022

10. G. Chen: “Developing the thermal resistant high-strength aluminum alloys via ingot metallurgy and thermomechanical process”, The 18^th International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan
11. Zhang, A. Arici1, F. Breton, X.-G. Chen: “Influence of transition elements (zirconium, vanadium and molybdenum) on microstructure and strengthening of AlSi8Mg foundry alloys”, The 18^th International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan
12. Li, K. Liu, and X-G. Chen: “Effects of transition elements (V, Zr and Mo) on the microstructures andelevated-temperature properties in Al-Si 356 type cast alloys”, The 18^th International Conference on Aluminum Alloys, ICAA18, September 4-8, 2022, Yoyama, Japan
13. -G. Chen: “Hot deformation and its softening mechanisms of aluminum wrought alloys|”, In: Rio Tinto Rolling Slab Global Technical Seminar, August 30 – 31, 2022.
14. Cui, Z. Zhang, D. K. Sarkar, D. Kocaefe and X.-G, Chen: “A study on aluminum-based lightweight entropic alloys with high strength at elevated temperature”, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 413-423, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022
15. Khalilpoor, D. Larouche, X.G. Chen, and J. Colbert: “Prediction of Hot Tearing in the AA6111 Alloy during DC Casting of Flat Ingots”, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022
16. N. Khangholi, M. Javidani, A. Maltais, X.-G. Chen: “Enhanced strength and electrical conductivity of the Al-Mg-Si conductor alloys by adding Ag and applying the presaging”, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 269-278, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022
17. M. Tiwari, S. Noormohammed, X.-G. Chen and D.K. Sarkar: “Open pore effect on structural adhesive joining using an epoxy adhesive”, In: Proceedings of the 61th Conference of Metallurgists, COM 2022, p. 65-71, ISBN 978-3-031-17424-7, Montreal, August 21-24, 2022

 

2021

18. Hu, K. Liu, L. Pan, F. Breton, and X.-G. Chen: “Evolution of Precipitates and Mechanical Properties in Al-Cu 224 Cast Alloys with Various Mg Additions”, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021
19. Qassem, D. Larouche, M. Javidani, J. Colbert, X.-G. Chen: “Effect off Cu Content on Microstructure Evolution and Semisolid Behavior of AA6111 Alloy”, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021
20. Elasheri, E.M. Elgallad, N. Parson, X.-G. Chen: “Effect of Two-Step Homogenization on the Evolution of Al3Zr Dispersoids in Al-0.3Mg-0.4Si-0.2Zr Alloy”, In: Proceedings of the 60th Conference of Metallurgists, ISBN: 978-1-926872-53-7, COM 2021, August17-19, 2021
21. M. Tiwari, N. Saleema, X.-G. Chen, D. K. Sarkar: “Mechanical abrasion of AA6061-T6 alloy for the application of structural adhesive bonding”, The 44th Annual Virtual Meeting-The adhesion society, February 22-25, 2021
22. Liu, A. Algendy, J. Gu, X.-G. Chen: “Evolution of microstructure and dispersoids in Al-Mg 5xxx alloys under wire + arc additive manufacturing and permanent mold casting”, In: TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings. ISBN 978-3-030-65261-6, March 14-18, 2021, Orlando, FL, USA
23. M. Tiwari, N. Saleema, X.-G. Chen, D. K. Sarkar: “Simultaneous anodization and silanization for adhesive joining using epoxy adhesive”, International Conference on Material Characterization and Modelling (ICMCM-2021), December 13-14, 2021, Malaysia.

 

2020

24. Algendy, K. Liu, X.-G. Chen: “Formation of various intermetallic phases during solidification in Al-Mg 5xxx alloys with various Mg levels”, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02002
25. -G. Chen: “Effects of transition elements on hot deformation behaviors of aluminum wrought alloys”, ICAA2020, 17th International Conference on Aluminuim Alloys, Oct 26-29, 2020, Grenoble, France
26. Liu, Z. Zhang, F. Breton, X.-G. Chen: “Quench Sensitivity and Phase Transformation Kinetics of AlSi7MnMg High Pressure Vacuum Die Casting”, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02001
27. N. Khangholi, M. Javidani, A. Maltais, X.-G. Chen: “Investigation on electrical conductivity and hardness of 6xxx aluminum conductor alloys with different Si levels”, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 08002
28. Li, K. Liu, and X-G. Chen: “Influence of transition elements (V, Zr and Mo) and cooling rate on the precipitation of dispersoids in Al-7Si-0.6Cu-0.35Mg foundry alloy”, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 02003
29. Liu, C. Li, X.-G. Chen : “ Evolution of microstructure and elevated-temperature properties during hot rolling and post-rolling annealing process in Al-Mg-Si 6082 alloys”, F. DeGeusure et al. (Eds), 17th International Conference on Aluminuim Alloys 2020, MATEC Web Conf. 326 (2020) 03001
30. Zhang, A. Arici, D. Levasseur, F. Breton, X.-G. Chen: “Enhanced mechanical properties of high pressure vacuum die castings of Al-Si-Mg foundry alloys by Zr, V and Mo additions”, 124th Metalcasting Congress, American Foundry Society, April 21-23, 2020, Cleveland, Ohio, USA
31. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen, D. Massinon,: “ Precipitation kinetics and evaluation of the interfacial mobility of precipitates in an AlSi7Cu0.5Mg0.3 cast alloy”, TMS 2020 Annual Meeting, Feb 23-27, San Diego, CA, USA
32. Attia, K. Ragab, M. Bouazara and X.-G Chen: “Influence of thermal treatment and design parameters on the fatigue life of automotive control arm fabricated from A357 semi-solid alloy”, TMS 2020 Annual Meeting, Feb 23-27, San Diego, CA, USA
33. Chen, K. Liu, and X.-G. Chen: “Effect of Mo on elevated-temperature low-cycle fatigue behavior of Al-Si 356 cast alloy”, TMS 2020 Annual Meeting, Feb 23-27, San Diego, CA, USA

2019

34. Agbe, D. K. Sarkar, X.-G. Chen, N. Faucheux, G. Soucy, J. L. Bernier: “Silver-based nanocomposite coatings on anodised aluminium surface with excellent antibacterial properties”, Oral presentation in REGAL Student’ Day 2019, Oct 8-9, Quebec City, QC, Canada, Aluminum Research Centre – REGAL
35. Jann, O. Drevelle, M. Dumont, J.-L. Bernier, H. Agbe, D. K. Sarkar, X-G. Chen, G. Soucy, L.C. Fortier and N. Faucheux: “Development of biocidal surface technology based on anodized aluminum designed to fight nosocomial infections”, In: 69th Canadian Chemical Engineering Conference (CCEC), October 20-23, 2019, Halifax, Canada
36. Agbe, D. K. Sarkar, X.-G. Chen, J. Jann, N. Faucheux, O. Drevelle, G. Soucy,J. L. Bernier: “Tunable superhydrophobic Ag-based nanocomposite coatings on Aluminium with enhanced antibacterial and anti-fouling properties”, In: ICANM2019: 7^th International Conference & Exhibition on Advanced and Nano Materials, 12-14 August 2019, Montreal, Canada
37. Chen, K. Liu, X.-G. Chen: “Elevated-temperature low-cycle fatigue behaviors of Al-Si 356 and 319 foundry alloys”, C. Chesonis (ed.), Light Metal 2019, TMS, p. 251-257
38. Liu, X. Cao, A Bolouri, X.-G. Chen: “Effect of Fe-rich intermetallics on tensile behavior of Al-Cu 206 cast alloys at solid and near-solid states”, T. Tiryakioglu et al (ed.), Shape Casting 2019, TMS, p. 85-96

 

2018

39. Agbe, D. K. Sarkar, X. G. Chen, J. L. Bernier: “Synthesis of Ag-base nanocomposites on anodic aluminium oxide templates: a review”, In: ICANM2018: 6^th International Conference & Exhibition on Advanced and Nano Materials, 6-8 August 2018, Quebec City, Canada
40. Xu, K. Rajan, X. G. Chen, D. K. Sarkar: “Aluminum based nanostructured superhydrophobic thin films on the protections of copper against corrosion”, In: ICANM2018: 6^th International Conference & Exhibition on Advanced and Nano Materials, 6-8 August 2018, Quebec City, Canada
41. Chen, D. K. Sarkar, X.-G. Chen: “Synthesis and characterization of nanostructured Al-based layered double hydroxides in the application of supercapacitor”, In: ICANM2018: 6^th International Conference & Exhibition on Advanced and Nano Materials, 6-8 August 2018, Quebec City, Canada
42. Liu, X.-G. Chen: “Improvement in elevated-temperature properties of Al-13%Si piston alloys by dispersoid strengthening via Mn addition”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
43. Li, K. Liu, N. Parson, X.-G. Chen: “The effect of heat treatments on precipitation behavior of dispersoids in Al-Mg-Si-Mn alloy”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
44. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen: “Precipitation kinetics of an AlSi7Cu3.5Mg0.1 alloy with Zr and V additions”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
45. Zhang, M.-Y. Liu, F. Breton, X.-G. Chen: “Microstructure and mechanical properties of alsi10mg permanent mould and high pressure vacuum die castings”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
46. Qin, D. Racine, K. Liu, X.-G. Chen: “Strain-controlled thermo-mechanical fatigue testing of aluminum alloys using Gleeble 3800 system”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
47. Arici, Z. Zhang, F. Breton, X.-G. Chen: “Effect of Zr and V additions on microstructure and mechanical properties of Al-Si-Mg alloy”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
48. Li, Z. Zhang, X.-G. Chen, H. Nagaumi: “Effect of Cr on mechanical properties and microstructure of Al-Mn-Mg-Si alloys”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada
49. Heugue, D. Larouche, F. Breton, R. Martinez, X.-G. Chen: “Evaluation of the interfacial mobility of precipitates in Al-Cu cast alloy by calorimetric kinetic analysis”, In: ICAA16: 16^th International Conference on Aluminium Alloys, 17-21 June 2018, Montreal, Canada

 

2017

50. Liu, H. Ma, X.-G. Chen: “Evolution of Dispersoids and Elevated-Temperature Properties during Two-Step Heat Treatments in Al-Mn-Mg 3004 Alloys”, In: COM 2017 – Conference of Metallurgists Proceedings, Aug 27-30, 2017, Vancouver, Canada, ISBN: -1-926872-36-0, paper no. 9465
51. A. Mirza, K. Liu, X.-G. Chen: “Cyclic Stress-Strain Behavior and Low Cycle Fatigue Life of AA6061 Aluminum Alloy”, A.P. Ratvik (ed.), Light Metal 2017, TMS, p.447-452
52. Han, X.-Grant Chen: “Corrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution”, Materials Science Forum, 2017, Vol. 877, p. 530-536
53. Bolouri, X.-Grant Chen: “Tensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature”, Materials Science Forum, 2017, Vol. 877, p. 90-96

 

2016

54. A. Laurin, N. Parson, X.-Grant Chen: “Improved Boralcan™ MMC Materials for Elevated Temperature Applications”, In: Proceedings of the 18th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM 2016), Sept 18-23, 2016, Kobe, Japan, paper no. 1051
55. Pan, K. Liu, F. Breton and X.-Grant Chen: “Effects of Minor Alloying Elements on Microstructure and Creep Properties of 8xxx Aluminum Conductor Alloys”, In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, 11-15 Sept 2016, Québec city, Canada,  ISBN: 978-1-926872-29-2, paper no. 1012
56. Huang, D. K. Sarkar and X.-Grant Chen: “Studies of Compositional and Corrosion Properties of Nanostructured Superhydrophobic Thin Films On Aluminum Substrates”, In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, 11-15 Sept 2016, Québec city, Canada, ISBN: 978-1-926872-29-2, paper no. 1020
57. Xiong, D. K. Sarkar and X.-Grant Chen: “Electrochemical Impedance Spectroscopy (EIS) Studies Of Selfassembled Monolayers (SAM) on Aluminum Substrates” In: IMPC 2016: XXVIII International Mineral Processing Congress Proceedings, 11-15 Sept 2016, Québec city, Canada, ISBN: 978-1-926872-29-2, paper no. 1021
58. Bolouri and X.-Grant Chen: “Tensile Deformation Behavior of Al-Cu 206 Cast Alloys near the Solidus Temperature”, ”, In: ICAA15: 15^th International Conference on Aluminium Alloys, 12-16 June 2016, Chongqing, China
59. Han and X.-Grant Chen: “Corrosion Characteristics of Al-B4C Metal Matrix Composites in Boric Acid Solution”, In: ICAA15: 15^th International Conference on Aluminium Alloys, 12-16 June 2016, Chongqing, China
60. Liu, A.M. Nabawy, X.-G. Cen: “Influence of TiB₂ nanoparticles on the elevated-temperature properties of Al-Mn-Mg 3004 alloy”, In: ICAA15: 15^th International Conference on Aluminium Alloys, 12-16 June 2016, Chongqing, China
61. Li, Z. Zhang, X.-G. Chen: “Effect of Magnesium on Dispersoid Strengthening of Al-Mn-Mg-Si 3xxx Alloys”, In: ICAA15: 15^th International Conference on Aluminium Alloys, 12-16 June 2016, Chongqing, China

 

2015

62. J. Shi, X.-G. Chen: “Effects of Zr and V Micro-Alloying on Activation Energy during Hot Deformation of 7150 Aluminum Alloys”, In: The proceedings of Light Metals 2015, TMS 2015, edited by M. Hyland, p. 163-167
63. Liu, X. Cao, X.-G. Chen: “Effect of Fe on the Evolution of Microstructure and Elevated Temperature Properties in Al-Mn-Mg 3004 Alloys”, In: COM 2015 – Conference of Metallurgists Proceedings, 23-26 Aug 2015, Toronto, Canada, ISBN: 978-1-926872-32-2, paper no. 8889
64. M. Elgallad, P. Shen, X.-G. Chen: “A Novel Heat Treatment Practice for Al-3%Cu-1%Mg DC Cast Ingot Plates”, In: COM 2015 – Conference of Metallurgists Proceedings, 23-26 Aug 2015, Toronto, Canada, ISBN: 978-1-926872-32-2, paper no. 8747

 

2014

65. Liu, X. Cao, X.-G. Chen: “Role of iron-rich intermetallics in aluminum-copper 206 cast alloys during tensile deformation”, In: COM 2014 – Conference of Metallurgists Proceedings, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8360
66. R. Farkoosh, X.-G. Chen and M. Pekguleryuz: “The formation of Al-(Fe,Mo)-Si dispersoid phase during solution heat treatment of an Al-Si-Cu-Mg-(Mo) casting alloy and its effect on strength and creep resistance” In: COM 2014 – Conference of Metallurgists Proceedings, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8579
67. M. Nabawy, X.-G. Chen: “Manufacturing Al-TiB2 nanocomposites with K2ZrF6 flux-assisted melt stirring” In: COM 2014 – Conference of Metallurgists Proceedings, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8376
68. Liu, X. Cao, X.-G. Chen: “Evolution of iron-rich intermetallics in aluminum-copper 206 cast alloys”, In: COM 2014 – Conference of Metallurgists Proceedings, Sept 28 to Oct 1, 2014, Vancouver, Canada, ISBN: 978-1-926872-24-7, paper no. 8361
69. Qin, Z. Zhang, X.-G. Chen: “Effect of hot deformation on microstructure and mechanical properties of Al-B4C composite containing Sc”, In: The proceedings of 14th International Conference on Aluminum Alloys (ICAA14), June 15-19, 2014, Trondheim, Norway, p. 821-826
70. Pan, B. Bourassa, X.-G. Chen: “Effect of thermomechanical processing on electrical and mechanical properties of aluminum conductor alloys”, In: The proceedings of 14th International Conference on Aluminum Alloys (ICAA14), June 15-19, 2014, Trondheim, Norway, p. 1121-1126

 

2013

71. Shen, E.M. Elgallad, X.-G. Chen: “On the Aging Behavior of AA2618 DC Cast Alloy”, In: The proceedings of Light Metals 2013: Aluminum Alloys: Fabrication, Characterization and Applications, TMS 2013, 3-7 March 2013, San Antonio, USA, p. 373-377
72. Liu, X. Cao, X.-G. Chen: “Effect of Cooling Rate on Iron-rich Intermetallic Phases in 206 Cast Alloys”, In: The proceedings Light Metals 2013: Aluminum Alloys: Fabrication, Characterization and Applications, TMS 2013, 3-7 March 2013, San Antonio, USA, p. 311-316
73. M. Nabawy, X.-G. Chen: “Melt Processing of Al-TiB2 Nanocomposite Materials”, In: The proceedings of the 8^th Pacific Rim International Congress on Advanced Materials and Processing, August 4-9, 2013, Waikoloa, Hawaii, USA, p. 2353-2361
74. M. Nabawy, Z. Zhang, X.-G. Chen: “Synthesis of Al-TiB2 Nanocomposite Using High Frequency Induction Melting”, In: The proceedings of Materials Science and Technology (MS&T 2013), October 27-31, 2013, Montreal, Quebec, Canada, p. 1284-1293
75. Zhang, G. Li, X.-G. Chen : “Characterization of Fir-Tree Zone In AA1050 DC Cast Ingot”, In: The proceedings of Materials Science and Technology (MS&T 2013), October 27-31, 2013, Montreal, Quebec, Canada, p. 1187-1194
76. Ying Huang, D. K. Sarkar, X-Grant Chen: “Fabrication of Superhydrophobic Aluminum Surfaces by Chemical Etching and Electrophoretic Deposition Processes for Corrosion Application”, In: The proceedings of Materials Science and Technology (MS&T 2013), October 27-31, 2013, Montreal, Quebec, Canada, p. 2297-2284
77. R. Farkoosh, X.-G. Chen and M. Pekguleryuz: “The Effects of Mg, Mo And Cr on the Microstructure and Elevated Temperature Mechanical Properties of an Al-Si-Cu-Mg Alloy” In: The proceedings of Materials Science and Technology (MS&T 2013), October 27-31, 2013, Montreal, Quebec, Canada, p. 1220-1227
78. Marchand, J.-A. Laurin, M. Roux, X-G. Chen: “BORALCAN^TM, an Advanced Cast Aluminium Product for Nuclear Application”, In: The proceedings of the 12^th International Aluminum Conference, October 21-23, 2013, Montreal, Quebec, Canada, p. 407-414

 

2012

79. J. Shi, X.-G. Chen: “Hot Deformation Behavior and Microstructural Evolution of Homogenized 7150 Aluminum Alloys Micro-Alloyed With Zr And V”, In: The proceedings of 13^th International Conference on Aluminum Alloys (ICAA13), June 3-7, 2012, Pittsburgh, USA, p. 1599-1605
80. Zhang, G. Li, X.-G. Chen: “Identification and Distribution of Fe Intermetallic Phases in AA5657 DC Cast Ingots”, In: The proceedings of 13^th International Conference on Aluminum Alloys (ICAA-13), June 3-7, 2012, Pittsburgh, USA, p. 1857-1863
81. Saleema, P. Gauthier, X.-G. Chen: “Corrosion Fatigue Mechanism on Hot-Forged AA6082 Aluminum Alloy”, In: The proceedings of 13^th International Conference on Aluminum Alloys (ICAA-13), June 3-7, 2012, Pittsburgh, USA, p. 397- 403
82. M. Elgallad, A. Hekmat-Ardakan, F. Ajersch, X.-G. Chen: “Microstructure and Mechanical Properties of AA2195 DC Cast Ingot Plates”, In: The proceedings of 13^th International Conference on Aluminum Alloys (ICAA-13), June 3-7, 2012, Pittsburgh, USA, p. 1865-1871

 

2011

83. M. Han, D. Gallant, and X.G. Chen: “Corrosion Behaviour of Al-B₄c Metal Matrix Composites in H₃BO₃, K₂SO₄ and Nacl Solutions”, In: Light Metal Proceedings 2011, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 415-425
84. Hekmat-Ardakan,F. Ajersch, X.-G. Chen and M. Tebib: “Development of hypereutectic Al-Si casting alloys with variable mg content”, In: Light Metal Proceedings 2011, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 439-449
85. Guo, P. Gougeon, F. Nadeau, X.-G. Chen : “Potential of laser welding and friction stir welding for joining AA1100-16 vol.% B₄C metal matrix composite”, In: Innovation in joining of advanced materials, edited by P. Wanjara et al, COM 2011, MetSoc, p. 15-26
86. Gautier, M. Fortier,E. Ghali, A. Charette and X.-G. Chen: “Corrosion behavior of forged AA6082 aluminum alloy from different feedstock”, In: Light Metal Proceedings 2011, edited by M. Fafard, G. Dufour, COM 2011, MetSoc, p. 437-438
87. Liu, X. Cao, X.-G. Chen : “Effect of Mn And Si on Iron-Containing Intermetallics in Cast 206 Aluminum Alloys”, In: Light Metals – Advances in Materials and Processes, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 113-120
88. M.A. Mohamed, M. Fortier, X.-G. Chen: “Effect of Zr on Primary Intermetallic Formation And Grain Refinement of 7003 Alloy”, In: Light Metals – Advances in Materials and Processes, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 13-21
89. Zhang, K. Fortin, A. Charette, X.-G. Chen: “Effect of Mg on Fluidity and Microstructure of Al-12%B₄C Composites”, In: Proceedings of the 12th International Conference on Aluminium Alloys (ICAA 12), 5-9 September 2010, Yokohama, Japan, p. 739-744
90. Kocaefe, A. Sarkar, X.-G. Chen: “Wetting of Various Interfacial Reaction Products Formed during Al-B4c Composite Preparation by Aluminum”, In: Light Metals – Advances in Materials and Processes, edited by D. Gallienne, M. Bilodeau, COM 2010, MetSoc, p. 357-369
91. Huang, D. K. Sarkar and X.-G. Chen: “Fabrication of Nanostructured Superhydrophobic Copper by a One-Step Process”, in: Proceedings of the International Conference on Nanotechnology: Fundamentals and Applications, Ottawa, Ontario, Canada, 4-6 August 2010, p. 480-1-4