La liste ci-dessous recense les écrits et les collaboratiArticleons à de la documentation scientifique ou académique dans le domaine des sciences appliquées réalisés par des membres de la communauté universitaire de l’UQAC au cours des mois de juin, juillet et août 2019.

Votre ouvrage a été publié au cours des dernier mois, mais ne se retrouve pas dans la liste?  Partagez-le avec nous par courriel à publications@uqac.ca.

ARTICLE DE REVUE

• Abdelaziz, M. H., Elgallad, E. M., Doty, H. W., Valtierra, S., & Samuel, F. H. (2019). Melting and solidification characteristics of Zr-, Ni-, and Mn-containing 354-type Al-Si-Cu-Mg cast alloys. Philosophical Magazine, 99(13), 1633-1655. doi: 10.1080/14786435.2019.1597993
• Abdelaziz, M. H., Samuel, A. M., Doty, H. W., Valtierra, S., & Samuel, F. H. (2019). Effect of additives on the microstructure and tensile properties of Al-Si alloys. Journal of Materials Research and Technology, 8(2), 2255-2268. doi: 10.1016/j.jmrt.2019.03.003
• Chehri, A., & Fortier, P. (2019). Low-Cost Localization and Tracking System with Wireless Sensor Networks in Snowy Environments. Smart Innovation, Systems and Technologies, 145, 529-543. doi: 10.1007/978-981-13-8566-7_48
• Chehri, A., & Jeon, G. (2019). The Industrial Internet of Things: Examining How the IIoT Will Improve the Predictive Maintenance. Smart Innovation, Systems and Technologies, 145, 517-527. doi: 10.1007/978-981-13-8566-7_47
• Chehri, A., & Jeon, G. (2019). Routing Protocol in the Industrial Internet of Things for Smart Factory Monitoring. Smart Innovation, Systems and Technologies, 145, 505-515. doi: 10.1007/978-981-13-8566-7_46
• Eke, S., Clerc, G., Aka-Ngnui, T., & Fofana, I. (2019). Transformer condition assessment using Fuzzy C-means clustering techniques IEEE Electrical Insulation Magazine, 35(2), 47-55.
• Farid, R., Rajan, K., & Sarkar, D. K. (2019). Enhanced corrosion protection of aluminum by ultrasonically dip coated sodium silicate thin films. Surface and Coatings Technology, 374, 355-361. doi: 10.1016/j.surfcoat.2019.05.082
• Heugue, P., Larouche, D., Breton, F., Martinez, R., & Chen, X. G. (2019). Evaluation of the Growth Kinetics of θ′ and θ-Al2Cu Precipitates in a Binary Al-3.5 Wt Pct Cu Alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50(7), 3048-3060. doi: 10.1007/s11661-019-05227-8
• Jemmali, M. A., Otis, M. J. D., & Ellouze, M. (2019). Robust stabilization for discrete-time Takagi-Sugeno fuzzy system based on N4SID models. Engineering Computations (Swansea, Wales), 36(4), 1400-1427. doi: 10.1108/EC-06-2018-0285
• Lin, L., & Sawyer, E. W. (2019). Microstructure and compositional changes across biotite-rich reaction selvedges around mafic schollen in a semipelitic diatexite migmatite. Journal of Metamorphic Geology, 37(4), 539-566. doi: 10.1111/jmg.12475
• Liu, M., Zhang, Z., Breton, F., & Chen, X. G. (2019). Investigation of the quench sensitivity of an AlSi10Mg alloy in permanent mold and high-pressure vacuum die castings. Materials, 12(11). doi: 10.3390/ma12111876
• Maghsoudi, K., Momen, G., Jafari, R., & Farzaneh, M. (2019). Rigorous testing to assess the self-cleaning properties of an ultra-water-repellent silicone rubber surface. Surface and Coatings Technology, 374, 557-568. doi: 10.1016/j.surfcoat.2019.05.073
• Maitre, J., Bouchard, K., & Bédard, L. P. (2019). Mineral grains recognition using computer vision and machine learning. Computers and Geosciences, 130, 84-93. doi: 10.1016/j.cageo.2019.05.009
• Mon-Nzongo, D. L., Ekemb, G., Song-Manguelle, J., Ipoum-Ngome, P. G., Jin, T., & Doumbia, M. L. (2019). Lcis and PWM-vsis for the petroleum industry: A torque oriented evaluation for torsional analysis purposes. IEEE Transactions on Power Electronics, 34(9), 8956-8970. doi: 10.1109/TPEL.2018.2886209
• Mostofi Sarkari, N., Darvish, F., Mohseni, M., Ebrahimi, M., Khani, M., Eslami, E., … Dee, C. F. (2019). Surface characterization of an organosilane-grafted moisture-crosslinked polyethylene compound treated by air atmospheric pressure non-equilibrium gliding arc plasma. Applied Surface Science, 490, 436-450. doi: 10.1016/j.apsusc.2019.06.007
• Tremblay, N., Kamali, K., Cardou, P., Desrosiers, C., Gouttefarde, M., & Otis, M. J. D. (2019). Eye-on-hand calibration method for cable-driven parallel robots. Mechanisms and Machine Science, 74, 345-356. doi: 10.1007/978-3-030-20751-9_29
• Wisen, J., Chesnaux, R., Wendling, G., Werring, J., Barbecot, F., & Baudron, P. (2019). Assessing the potential of cross-contamination from oil and gas hydraulic fracturing: A case study in northeastern British Columbia, Canada. Journal Of Environmental Management, 246, 275-282. doi: 10.1016/j.jenvman.2019.05.138
• Anvari, A., Kekre, K. M., Azimi Yancheshme, A., Yao, Y., & Ronen, A. (2019). Membrane distillation of high salinity water by induction heated thermally conducting membranes. Journal of Membrane Science, 589. https://doi.org/10.1016/j.memsci.2019.117253
• Barnes, S. J., Pagé, P., & Zientek, M. (2019). The Lower Banded series of the Stillwater Complex, Montana: whole-rock lithophile, chalcophile, and platinum-group element distributions. Mineralium Deposita. https://doi.org/10.1007/s00126-019-00887-3
• Chehri, A., & Mouftah, H. T. (2019). Autonomous vehicles in the sustainable cities, the beginning of a green adventure. Sustainable Cities and Society, 51. https://doi.org/10.1016/j.scs.2019.101751
• Desroches, D., Bédard, L. P., Lemieux, S., & Esbensen, K. H. (2019). Representative sampling and use of HHXRF to characterize lot and sample quality of quartzite at a pyrometallurgical ferrosilicon plant. Minerals Engineering, 141. https://doi.org/10.1016/j.mineng.2019.105852
• Ferroud, A., Chesnaux, R., & Rafini, S. (2019). Drawdown log-derived analysis for interpreting constant-rate pumping tests in inclined substratum aquifers. Hydrogeology Journal, 27(6), 2279-2297. https://doi.org/10.1007/s10040-019-01972-7
• Higgins, M. D., & Morata, D. (2019). Development of complex, sub-vertical layering in the Cortaderas gabbro intrusion, Central Chile. Lithos, 340-341, 124-138. https://doi.org/10.1016/j.lithos.2019.05.008
• Hosseini, S., Taheri, S., Farzaneh, M., & Taheri, H. (2019). A High-Performance Shade-Tolerant MPPT Based on Current-Mode Control. IEEE Transactions on Power Electronics, 34(10), 10327-10340. https://doi.org/10.1109/TPEL.2019.2894528
• Ibrahim, M. F., Abdelaziz, M. H., Samuel, A. M., Doty, H. W., & Samuel, F. H. (2019). Effect of Rare Earth Metals on the Mechanical Properties and Fractography of Al–Si-Based Alloys. International Journal of Metalcasting. https://doi.org/10.1007/s40962-019-00336-x
• Jafari, R., Cloutier, C., Allahdini, A., & Momen, G. (2019). Recent progress and challenges with 3D printing of patterned hydrophobic and superhydrophobic surfaces. International Journal of Advanced Manufacturing Technology, 103(1-4), 1225-1238. https://doi.org/10.1007/s00170-019-03630-4
• Jemmali, M. A., Otis, M. J. D., & Ellouze, M. (2019). Robust stabilization for discrete-time Takagi-Sugeno fuzzy system based on N4SID models. Engineering Computations (Swansea, Wales), 36(4), 1400-1427. https://doi.org/10.1108/EC-06-2018-0285
• Jin, L., Liu, K., & Chen, X. G. (2019). Evolution of Fe-Rich Intermetallics in Al-Si-Cu 319 Cast Alloy with Various Fe, Mo, and Mn Contents. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 50(4), 1896-1907. https://doi.org/10.1007/s11663-019-01584-2
• Meziane, R., Cardou, P., & Otis, M. J. D. (2019). Cable interference control in physical interaction for cable-driven parallel mechanisms. Mechanism and Machine Theory, 132, 30-47. https://doi.org/10.1016/j.mechmachtheory.2018.10.002
• Mohamed, S. S., Samuel, A. M., Doty, H. W., Valtierra, S., & Samuel, F. H. (2019). Development of Residual Stresses in Al–Si Engine Blocks Subjected to Different Metallurgical Parameters. International Journal of Metalcasting. https://doi.org/10.1007/s40962-019-00342-z
• Qian, X., Parson, N., & Chen, X. G. (2019). Effects of Mn addition and related Mn-containing dispersoids on the hot deformation behavior of 6082 aluminum alloys. Materials Science and Engineering A, 764. https://doi.org/10.1016/j.msea.2019.138253
• Qin, J., Zhang, Z., & Chen, X. G. (2019). Evolution of activation energy during hot deformation of Al-15% B4C composites containing Sc and Zr. AIMS Materials Science, 6(4), 484-497. https://doi.org/10.3934/matersci.2019.4.484
• Samuel, A. M., Doty, H. W., Valtierra, S., & Samuel, F. H. (2018). Intermetallic precipitation in rare earth-treated A413.1 alloy: A metallographic study. Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 109(2), 157-171. https://doi.org/10.3139/146.111591
• Tian, N., Yuan, F., Duan, C., Liu, K., Wang, G., Zhao, G., & Zuo, L. (2019). Prediction of the work-hardening exponent for 3104 aluminum sheets with different grain sizes. Materials, 12(15), 2368. https://doi.org/ 10.3390/ma12152368
• Vazirinasab, E., Jafari, R., & Momen, G. (2019). Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach. Surface and Coatings Technology, 375, 100-111. https://doi.org/10.1016/j.surfcoat.2019.07.005

ACTE DE CONFÉRENCE

• Brassard, J. D., Laforte, C., Tremblay, M. M., & Volat, C. (2019, june 17-21). Runway Deicing Product Anti/Deicing Performance Assessment: Review and Future Directions. Communication présentée au SAE International Conference on Icing of Aircraft, Engines, and Structures, Minneapolis, Minnesota.
• Brassard, J. D., Laforte, C., & Volat, C. (2019, june 17-21). Type IV Anti-Icing Fluid Subjected to Light Freezing Rain: Visual and Thermal Analysis. Communication présentée au SAE International Conference on Icing of Aircraft, Engines, and Structures, Minneapolis, Minnesota.
• Yin, G., Otis, M. J. D., Fortin, P. E., & Cooperstock, J. R. (2019). Evaluating multimodal feedback for assembly tasks in a virtual environment. Communication présentée au Proceedings of the ACM on Human-Computer Interaction.